| 1. | Pci to serial 6 - port host controller card
笔记本1394卡笔记本串口卡 |
| 2. | Pci sata ata combo controller card
笔记本1394卡笔记本串口卡 |
| 3. | Pci express 2 - channel sata ii controller card
串口卡并口卡 |
| 4. | Pci to serial 8 - port host controller card
串口卡并口卡 |
| 5. | Shadow ram is used to accelerate access to the roms on your motherboard and on some of the controller cards
影像内存被用来提高对主板上或者某些控制卡上的rom的访问速度。 |
| 6. | At present , the pci bus controller card has beening successfully used in the syetem for adas romote receiving , and satisfies the need
目前,本文介绍的基于pci总线控制卡已经成功应用于adas遥测接收系统,经测试其性能完全满足应用的要求。 |
| 7. | Some newer computer system motherboards dont have eide ports , but a pci eide controller card can be installed to add support for eide drives
一些较新的电脑系统主板没有eide端口，但可以安装一个pci eide控制卡来为eide驱动器提供支持。 |
| 8. | Some older computer system motherboards dont have sata ports , but a pci sata controller card can be installed to add support for sata drives
一些较老的电脑系统主板没有sata端口，但可以安装一个pci sata控制卡来为sata驱动器提供支持。 |
| 9. | However , if you are using a cd - rom with a proprietary interface , you should know the manufacturer , as well as the model of the drive and controller card
然而，如果你正在和一个专有的介面一起使用一个光盘，你应该认识制造业者、连同磁盘的模型和控制器卡。 |
| 10. | Presently the most popular open nc model is " nc embedded in pc " and it is made up of open motion controller card , personal computer , and numerical control software
目前常用的开放式数控系统模型为“ nc嵌入pc ”结构，它由开放体系结构运动控制卡+ pc机+ cnc软件构成。 |
